Autel MaxiIM IM508 Key Programming and Diagnostic Tool + XP005 + Key Tool Max & XP400 PRO
- Autel MaxiIM IM508 Key Programming and Diagnostic Tool
- Xhorse Condor Dolphin XP005 Key Cutting Machine
- XHORSE VVDI Key Tool MAX Remote Generator
- Autel XP400 PRO Key Programming and Diagnostic Tool
- IM508 Tablet
- XP200 Key Programmer
- Cables & Cords
- USB Adapter
- Carry Case
MaxiIM IM508 is a fast, easy-to-use, and ultra portable immobilizer and key programming device. The Android-based touchscreen tablet features powerful quad-core processor, intuitive design and straight-forward interface. Equipped with the XP200 key programmer, IM508 is capable of providing extraordinary service functions for the immobilizer system. Together with the ability to quickly diagnose all modules of the majority of makes and models on the market, IM508 provides you with superior special functions. IM508 is the perfect solution for shops and technicians who demand affordable and powerful IMMO and diagnostic services.
- Powerful Cortex-A9 processor.
- 7”1024x600 LCD capacitive touchscreen.
- Internal reliable 32GB Memory.
- Android Operating System for fast boot-up and multitasking.
- Powerful combination of key programming/all system diagnostics/advanced maintenance services.
- Smart Mode for guided and automated key learning.
- Expert Mode for advanced key learning.
- Read PIN/CS (all key lost) , key generation, key learning, remote learning.
- IMMO ECU reset/adaptation, refresh/coding.
- Transponder read/write, EEPROM/MCU read/write.
- Powerful OE level diagnostics for more than 80 US, Asian and European makes and models.
- Advanced maintenance services including EPB, DPF, SAS, Oil reset, BMS and TPMS sensor ID relearn.
Immo and Key Programming
- Read PIN / CS (All Key Lost)
- Key Generation
- Key Learning / Remote Learning
- Backup / Restore IMMO data
- IMMO ECU Reset / Adaptation / Refresh / Coding
- BMW FEM / BDC Key Learning and ECU Adaptation
- VW, AUDI MQB Key Learning, 48 Transponder (96-Bit) Add - Key, All Key Lost, A6 All Key Lost.
- XP200 Key & Chip Programming.
- Key Read / Write
- EEPROM / MCU Read / Write
All Systems Diagnostics:
- OE Level Diagnostics
- 80+ Vehicle Makes
- Shop & Data Manager Apps
- Advanced Maintenance Services including EPB, DPF, SAS, Oil Reset, BMS and TPMS Sensor ID relearn.
- Operating System: AndroidTM 4.4.4
- Processor: Cortex-A9 processor (1.6 GHz)
- Memory: 32GB
- Display: 7-inch LCD capacitive touchscreen with 1024x600 resolution
- Connectivity: Mini USB 2.0; USB 2.0; Wi-Fi; Micro SD card (supports up to 32GB)
- Sensors: Ambient light sensor for brightness auto changing
- Audio Input / Output: Input: N/A
- Output: buzzer
- Power and Battery: 3.7 V/5000 mAh lithium-polymer battery, Charges via 5 VDC power supply
- Tested Battery Life: Around 4.5 hours of continuous use
- Battery Charging Input: 5 V/1.5 A
- Power Consumption: 500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
- Operating Temp.: 0 to 50øC (32 to 122øF)
- Storage Temp.: -20 to 60øC (-4 to 140øF)
- Operating Humidity: 5% - 95% non-condensing
- Net Weight: 788 g (2.42 lb.)
- Supported Automotive Protocols: ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
Xhorse Condor Dolphin XP005 Key Cutting Machine Works on Mobile Phone APP Via Bluetooth English Version with Built-in Battery
- Newest version: V1.1.9
- Simple up operation interface built in Database
- It has all the capabilities of Condor XC Mini.
- Portable, build in High-energy lithium
- Battery, super long endu-rance ability
- Standardly include two clamp M1/M2
- Support sided/Track/Dimple/Tibbe keys
- Single machine with boss Tracer/Cutter
- All Aluminum Machine Body
- High precision Ball Screw
- Cross Rail
- Support multiple languages: English,Thai,Polish,Hindi,Chinese
- Support online update via Xhorse Update Kit
APP Smart Cellphone Operation
Built-in Bluetooth function, use smart cellphone to download APP, easy for smart operations.
Portable and Convenient
Compact structure design, perfect space utilization; built-in lithium battery one-time full charge, machine will cut 30-50 keys stable solid handle for safe and portable movement, perfect experience.
Standard Equipped 2 Clamps with Powerful Function
Standard equipped two clamps M1 and M2, supports Sided, Track, Dimple and Tibbe keys. Optional M3 clamp and M4 clamp are available, M3 clamp is applicable to Ford FO21 & Citroen SX9 keys, M4 clamp is applicable to single sided house-key.
All aluminum body structure, Manufactured by Germany-made DMG CNC machine.
American imported 3-Axis Precision Ball Screw with clearance function, ensures high precision cutting.
Provide rich vehicle data, blank key data, the best tool of all key lost.
Provide powerful free App, support multi-language, support mobile phone, tablet computer and other intelligent terminal control, easy for operations.
Built-in Lithium Battery
Optimized lithium battery of well-known brand, stable and reliable, support cutting under no power conditions.
Free online update software, the latest update information will be released timely, 24 hours support server online update, no need to back for update.
- The remote/transponder function is the same as the previous MINI KEY TOOL, and the renew remote same like Key Tool.
- Added IC Copy function
- Key Tool max can connect MINI OBD to work together.
- VVDI Max no need connect computer to update firmware,connect with internet, update in VVDI.
- Use KEY TOOL MAX to connect the dolphin to cut the key for the customer.
- Support Generate transponder and remote.etc
- Enter the car directly using KEY TOOL MAX+MINI OBD for matching. The entire process can be seamlessly connected without switching devices.
- KEY TOOL MAX +MINI OBD TOOL can not only match the chip remote control of imported domestic cars, smart card, but also Toyota H chip will be released first on KEY TOOL MAX.
- Generate Remote and Smart key
- Program and Immo Transponder
- Generate Special Transponder
- Renew Remote
- Recognize and Copy Access card
- Generate and Copy Garage Remote
- Frequency Detection and Copy remote
- Connect to Xhorse Key Cutting Machine
- Generate transponder,Transponder Clone, Generate Remote,Remote Clone, OBD matching transponder/remote/smart card.
The port which is used to connect the programmer is reserved. After the expansion, the chip can be written start data, and the operation of the IC reading data is equivalent to the function of the tango.
KEY TOOL MAX can be connected with Condor Dolphin XP-005 key machine via Bluetooth, to be used like operating screen of Dolphin XP-005.
Ways for Connect to Mani OBD Tool
- USB TYPE - C Cable
Click on the [Select] on the HOME page. Available device will be shown on the screen. Choose device to connect according to Serial Number.
Software will detect current device with software interface connection status、WLAN connection status and WIFI connection status.
How to Update VVDI Key Tool Max & Mini OBD Tool firmware
- VVDI Max no need connect with computer with Xhorse update kit software to update firmware,just connect VVDI Max with internet to update firmware is OK,easier to update.
- VVDI MINI OBD Tool Update:
- MINI OBD Tool connect with computer,use Xhorse update kit software to update firmware.
- Or connect mini OBD tool with VVDI max to update firmware.
Connect WIFI ensure internet is good.
Update need around 10 minutes,ensure device with enough power at least remain more than 20%.
Don't press Power button while update.
The XP400Pro - Advanced All-in-One Key Programmer
The XP400Pro is a replacement for XP400. It adds more functionality for BMW, Mercedes-Benz, as well as EEPROM reading. With the new protocols, the end-user will be able to read over 2000 (chips, components, devices) types including EEPROM and MCU Read, additional Odometer Read/Write, and more. Also, added functions for EWS3, W209, NEC, and more.
The new XP400Pro supports key renewal on 11 key types with additional adapters - IMKPA, Key Programming Accessories Kit.
- Expanded EEPROM functions for more component access.
- 170+ types Odometer component reading functions
- 180+ Immobilizer ECU component types
- 40+ Engine ECU component types
- 2000+ MCU component types
- 440+ EEPROM component types
- Compatible with IM508 and IM608
- Includes 1-Year Warranty
- Free Software Updates for Life of Tool
XP400Pro adds support for following chips：
- EEPROM-AMD-AM29FXXX series chip
- EEPROM- FUJITSU- MB29FXXX series chip
- EEPROM- ST- M29FXXX series chip
- Engine control module- ST- M29FXXX series chip
- IMMO- BENZ- ESL_W209_W906(Motorola) read/write/erase function
- IMMO- BMW-EWS3 module read/write function
- REMOTE_RENEW(renew key)- NEC- V51 and V5 chip read/write/erase
XP401 Pro adds support for following adaptor board:
- APB113 PCF79XX adaptor board
- APB114 EWS3 adaptor board
- APB115 NEC adapter board
- APB118 NEC ELV adaptor board
- APB119 TB28FXXX adaptor board
- APB120 TMS370 adaptor board
- APB121 AM29FXXX adapter board
- APB122 AM29FXXX adaptor board1
- APB123 AM29FXXX adaptor board
- APB126 M35080/D80 adaptor board
- APB127 MC68HC0(7)05BXX adaptor board
- APB128 MC68HC05X32 adaptor board
All orders are shipped between 24 hours or less Monday through Friday from 9:00 am to 6:00pm. Orders placed after 3 p.m. EST will be shipped next business day.
We may use the following carriers; FedEx, USPS and UPS. Our orders ship via FedEx within 48 continental U.S. states, Canada , Alaska, Hawaii and Puerto Rico. FedEx does not service P.O. Box or APO/FPO addresses .
We start processing the shipment of orders after we processed the payment.
We reserve the right to hold off shipping any orders that look fraudulent until we have a confirmation from a bank issuing a card
We are not responsible for lost or stolen items delivered in accordance with our shipping and delivery practices listed above. We are willing to work with a carrier to resolve any issues regarding your delivery.
Once a package has been shipped out per your order specifications, it is literally out of our hands and becomes the responsibility of the shipping carrier selected. We can't stop, delay or expedite any shipments once they have been shipped.
Only shipping services which have the transit time in the title (Next Day, Overnight, 2-Day, etc.) are guaranteed transit times. All other transit times (Ground, Priority, etc.) are estimates and are not guaranteed by the carrier or by LOCKSMITH KEYLESS. Shipping delays due to weather are not refundable as per the shipping carriers. Saturday delivery is not a guaranteed service. If Saturday delivery is selected and the shipment does not arrive on Saturday no shipping charges can be refunded.
Puerto Rico, Alaska & Hawaii
Orders to Puerto Rico, Alaska & Hawaii will not qualify for free shipping if they have ANY Hardware products on them and/or Key Machines. Only Automotive products are eligible for Free Shipping.
All orders placed after hours Friday, Saturday and Sunday will be shipped on Monday or the next business day in case of a holiday.
Friday - Overnight orders placed on Friday must be done before 2PM Eastern. Friday Overnight deliveries will arrive Monday unless a special Saturday delivery Overnight option is checked.
Saturday and Sunday - Orders will be shipped on Monday or the next business day in case of a holiday.
For international shipping, please note that you may be responsible for paying any possible customs and import duties at the time of delivery, however you should only worry about those fees if you order several hundred dollars worth of goods shipped outside the US. We are unable to determine these fees during the checkout process. You can contact your local Customs office for details.
Signature required may be requested on the shopping card. It is optional.
Missing Items / Discrepancies
Any wrong item or missing item(s) must be reported to us within 48 hours from delivery. We cannot replace or compensate for missing items after the 48 hour period.
Cancelled orders may be credited as a store credit or refunded with a 3% to 10% credit card fee.
If you a Locksmith & are not satisfied for any reason, products may be returned within 30 days of purchase for a store credit or exchange. Certain restrictions apply.