Honda Keyless Entry Remote Fob Programming Instructions
Keyless Entry Remote Fob Programming Instructions Available for the following Honda models.
Click below to select your model.
| Model | Year | |
|---|---|---|
| Honda Accord | 2000 | Programming Instructions |
| Honda Accord | 2001 | Programming Instructions |
| Honda Accord | 2002 | Programming Instructions |
| Honda Accord | 2003 | Programming Instructions |
| Honda Accord | 2004 | Programming Instructions |
| Honda Accord | 2005 | Programming Instructions |
| Honda Accord | 2006 | Programming Instructions |
| Honda Accord | 2007 | Programming Instructions |
| Honda Accord | 2008 | Programming Instructions |
| Honda Accord | 2009 | Programming Instructions |
| Honda Accord | 2010 | Programming Instructions |
| Honda Accord | 2011 | Programming Instructions |
| Honda Accord | 2012 | Programming Instructions |
| Honda Accord | 2013 | Programming Instructions |
| Honda Accord | 2014 | Programming Instructions |
| Honda Accord | 2015 | Programming Instructions |
| Honda Accord | 2016 | Programming Instructions |
| Honda Accord | 2017 | Programming Instructions |
2000 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2001 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2002 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2003 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2003 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2004 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2005 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2006 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2007 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2008 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2009 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2010 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2011 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Accord Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2012 Honda Accord Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda Accord Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2014 Honda Accord Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2015 Honda Accord Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2016 Honda Accord Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2017 Honda Accord Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Civic | 2001 | Programming Instructions |
| Honda Civic | 2002 | Programming Instructions |
| Honda Civic | 2003 | Programming Instructions |
| Honda Civic | 2004 | Programming Instructions |
| Honda Civic | 2005 | Programming Instructions |
| Honda Civic | 2006 | Programming Instructions |
| Honda Civic | 2007 | Programming Instructions |
| Honda Civic | 2008 | Programming Instructions |
| Honda Civic | 2009 | Programming Instructions |
| Honda Civic | 2010 | Programming Instructions |
| Honda Civic | 2011 | Programming Instructions |
| Honda Civic | 2012 | Programming Instructions |
| Honda Civic | 2013 | Programming Instructions |
| Honda Civic | 2014 | Programming Instructions |
| Honda Civic | 2015 | Programming Instructions |
| Honda Civic | 2016 | Programming Instructions |
| Honda Civic | 2017 | Programming Instructions |
2001 Honda Civic Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Civic Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2002 Honda Civic Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Civic Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2003 Honda Civic Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2003 Honda Civic Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda Civic Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2004 Honda Civic Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda Civic Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2005 Honda Civic Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2014 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2015 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2016 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2017 Honda Civic Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda CR-V | 2002 | Programming Instructions |
| Honda CR-V | 2003 | Programming Instructions |
| Honda CR-V | 2004 | Programming Instructions |
| Honda CR-V | 2005 | Programming Instructions |
| Honda CR-V | 2006 | Programming Instructions |
| Honda CR-V | 2007 | Programming Instructions |
| Honda CR-V | 2008 | Programming Instructions |
| Honda CR-V | 2009 | Programming Instructions |
| Honda CR-V | 2010 | Programming Instructions |
| Honda CR-V | 2011 | Programming Instructions |
| Honda CR-V | 2012 | Programming Instructions |
| Honda CR-V | 2013 | Programming Instructions |
| Honda CR-V | 2014 | Programming Instructions |
| Honda CR-V | 2015 | Programming Instructions |
| Honda CR-V | 2016 | Programming Instructions |
2002 Honda CR-V Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda CR-V Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2003 Honda CR-V Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2003 Honda CR-V Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda CR-V Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2004 Honda CR-V Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda CR-V Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2005 Honda CR-V Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda CR-V Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2006 Honda CR-V Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2014 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2015 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2016 Honda CR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda CR-Z | 2011 | Programming Instructions |
| Honda CR-Z | 2012 | Programming Instructions |
2011 Honda CR-Z Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda CR-Z Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Crosstour | 2010 | Programming Instructions |
| Honda Crosstour | 2011 | Programming Instructions |
| Honda Crosstour | 2012 | Programming Instructions |
| Honda Crosstour | 2013 | Programming Instructions |
| Honda Crosstour | 2014 | Programming Instructions |
| Honda Crosstour | 2015 | Programming Instructions |
2010 Honda Crosstour Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Crosstour Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Crosstour Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda Crosstour Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2014 Honda Crosstour Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2015 Honda Crosstour Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Element | 2003 | Programming Instructions |
| Honda Element | 2004 | Programming Instructions |
| Honda Element | 2005 | Programming Instructions |
| Honda Element | 2006 | Programming Instructions |
| Honda Element | 2007 | Programming Instructions |
| Honda Element | 2008 | Programming Instructions |
| Honda Element | 2009 | Programming Instructions |
| Honda Element | 2010 | Programming Instructions |
| Honda Element | 2011 | Programming Instructions |
2003 Honda Element Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda Element Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2004 Honda Element Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda Element Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2005 Honda Element Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda Element Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2006 Honda Element Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda Element Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2007 Honda Element Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda Element Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2008 Honda Element Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda Element Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Element Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2010 Honda Element Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Element Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Fit | 2007 | Programming Instructions |
| Honda Fit | 2008 | Programming Instructions |
| Honda Fit | 2009 | Programming Instructions |
| Honda Fit | 2010 | Programming Instructions |
| Honda Fit | 2011 | Programming Instructions |
| Honda Fit | 2012 | Programming Instructions |
| Honda Fit | 2013 | Programming Instructions |
| Honda Fit | 2014 | Programming Instructions |
| Honda Fit | 2015 | Programming Instructions |
| Honda Fit | 2016 | Programming Instructions |
| Honda Fit | 2017 | Programming Instructions |
| Honda Fit | 2018 | Programming Instructions |
| Honda Fit | 2019 | Programming Instructions |
2007 Honda Fit Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2007 Honda Fit Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda Fit Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2008 Honda Fit Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2014 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2015 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2016 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2017 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2018 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2019 Honda Fit Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda HR-V | 2016 | Programming Instructions |
| Honda HR-V | 2017 | Programming Instructions |
| Honda HR-V | 2018 | Programming Instructions |
| Honda HR-V | 2019 | Programming Instructions |
2016 Honda HR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2017 Honda HR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2018 Honda HR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2019 Honda HR-V Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Insight | 2000 | Programming Instructions |
| Honda Insight | 2001 | Programming Instructions |
| Honda Insight | 2002 | Programming Instructions |
| Honda Insight | 2003 | Programming Instructions |
| Honda Insight | 2004 | Programming Instructions |
| Honda Insight | 2005 | Programming Instructions |
| Honda Insight | 2006 | Programming Instructions |
| Honda Insight | 2010 | Programming Instructions |
| Honda Insight | 2011 | Programming Instructions |
| Honda Insight | 2012 | Programming Instructions |
2000 Honda Insight Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Insight Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2001 Honda Insight Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Insight Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2002 Honda Insight Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2002 Honda Insight Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2003 Honda Insight Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2003 Honda Insight Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda Insight Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2004 Honda Insight Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda Insight Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2005 Honda Insight Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda Insight Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2006 Honda Insight Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Insight Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Insight Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Insight Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Odyssey | 2000 | Programming Instructions |
| Honda Odyssey | 2001 | Programming Instructions |
| Honda Odyssey | 2002 | Programming Instructions |
| Honda Odyssey | 2003 | Programming Instructions |
| Honda Odyssey | 2004 | Programming Instructions |
| Honda Odyssey | 2005 | Programming Instructions |
| Honda Odyssey | 2006 | Programming Instructions |
| Honda Odyssey | 2007 | Programming Instructions |
| Honda Odyssey | 2008 | Programming Instructions |
| Honda Odyssey | 2009 | Programming Instructions |
| Honda Odyssey | 2010 | Programming Instructions |
| Honda Odyssey | 2011 | Programming Instructions |
| Honda Odyssey | 2012 | Programming Instructions |
| Honda Odyssey | 2013 | Programming Instructions |
2000 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2001 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2002 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2003 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2005 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2006 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2007 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2008 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2009 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2010 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2011 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2012 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda Odyssey Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2013 Honda Odyssey Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Pilot | 2003 | Programming Instructions |
| Honda Pilot | 2004 | Programming Instructions |
| Honda Pilot | 2005 | Programming Instructions |
| Honda Pilot | 2006 | Programming Instructions |
| Honda Pilot | 2007 | Programming Instructions |
| Honda Pilot | 2008 | Programming Instructions |
| Honda Pilot | 2009 | Programming Instructions |
| Honda Pilot | 2010 | Programming Instructions |
| Honda Pilot | 2011 | Programming Instructions |
| Honda Pilot | 2012 | Programming Instructions |
| Honda Pilot | 2013 | Programming Instructions |
2003 Honda Pilot Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2003 Honda Pilot Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda Pilot Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda Pilot Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2005 Honda Pilot Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda Pilot Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2006 Honda Pilot Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda Pilot Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2007 Honda Pilot Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda Pilot Keyless Entry Remote Fob Programming Instructions
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.
You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.
Note: a maximum of 3 remote transmitters can be programmed.
Make sure all the doors are UNLOCKED before starting this programming procedure.
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button on one of the remotes.
- Turn ignition switch to ACCESSORY (I) or LOCK (O)
- Turn ignition switch to ON (II)
- Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
- Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
- Turn the ignition switch to LOCK (O) to exit programming mode.
- Test remote(s)
2008 Honda Pilot Key Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda Pilot Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Pilot Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Pilot Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Pilot Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda Pilot Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Prelude | 1997 | Programming Instructions |
| Honda Prelude | 1998 | Programming Instructions |
| Honda Prelude | 1999 | Programming Instructions |
| Honda Prelude | 2000 | Programming Instructions |
| Honda Prelude | 2001 | Programming Instructions |
1997 Honda Prelude Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
1998 Honda Prelude Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
1999 Honda Prelude Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2000 Honda Prelude Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2001 Honda Prelude Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda Ridgeline | 2006 | Programming Instructions |
| Honda Ridgeline | 2007 | Programming Instructions |
| Honda Ridgeline | 2008 | Programming Instructions |
| Honda Ridgeline | 2009 | Programming Instructions |
| Honda Ridgeline | 2010 | Programming Instructions |
| Honda Ridgeline | 2011 | Programming Instructions |
| Honda Ridgeline | 2012 | Programming Instructions |
| Honda Ridgeline | 2013 | Programming Instructions |
| Honda Ridgeline | 2014 | Programming Instructions |
2006 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2010 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2011 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2012 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2013 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2014 Honda Ridgeline Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
| Model | Year | |
|---|---|---|
| Honda S2000 | 2000 | Programming Instructions |
| Honda S2000 | 2001 | Programming Instructions |
| Honda S2000 | 2002 | Programming Instructions |
| Honda S2000 | 2003 | Programming Instructions |
| Honda S2000 | 2004 | Programming Instructions |
| Honda S2000 | 2005 | Programming Instructions |
| Honda S2000 | 2006 | Programming Instructions |
| Honda S2000 | 2007 | Programming Instructions |
| Honda S2000 | 2008 | Programming Instructions |
| Honda S2000 | 2009 | Programming Instructions |
2000 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2001 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2002 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2003 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2004 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2006 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2007 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2008 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2009 Honda S2000 Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
