Lonsdor KH100+ Remote Smart Key Programmer - Copy Toyota H Chip

Lonsdor KH100+ Remote Smart Key Programmer - Copy Toyota H Chip

Lonsdor KH100+ is the new and improved versatile hand-held smart device, able to access control keys, simulate/ generate chip, generate remote (key), detect remote frequency, detect IMMO, unlock for Toyota smart key and more.

Latest Improvements:

• Exclusive support for 8A(H chip) generation.
• 902 Mhz Frequency Detection
• Integrated Chip Holder
• Data Collection from greater distance
• More accurate frequency detection
• Faster Calculations and more memory

The chips types can be copied by Lonsdor KH100P remote maker:

• 11 / 12 / 13 / 33 / 42 / 46 / 48 / 4C / 60 / 61 / 62 / 63 / 64 / 65 / 66 / 67 / 68 / 69 / 6A / 6B / 70E / 71 / 72G / 8A (Toyota H Chip)

Note 1:

• 11/12/13: Can be copied to T5/original JMD red super chip / original JMD king chip
• 33: Can be copied to T5/ blank 7935
• 42: Can be copied to blank 7935
• 46: Can be copied to LKP46/ CN3/ original JMD red super chip/ original JMD king chip
• 48: Can be copied to Deputy factory 48
• 4C/60/61/62/63/64/65/66/67/68/69/6A/6B/70E/71/72G: Can be copied to LKP4D/ JMD Red Super Chip (S-JMD) for Handy Baby/original JMD king chip for handy baby
• 8A (Toyota H) chip: Can be copied to TS21

Note 2:

• The copy function is encrypted by the chip itself, some original car keys only support reading or editing, not copy.
• If the original car key does not support copies, the copy button will not appear in the details page.

How to update Lonsdor HK100:

• Enter settings menu
• Connect the device to network
• Then choose [check for updates]
• One-click for online update!

Lonsdor KH100+ Functions:

When complete the registration activation, it enters below menu interface:

Identify Copy

Enter this menu, follow system prompts to operate (as shown).

Access card cloning

Enter this menu, you can identify and copy IC card, and generate garage key as well. Follow the prompts to operate(as shown below).

Simulate Chip

Put KH100+'s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate.
This device supports below chip types: 4D, 46, 48, 47

Generate Chip

Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.
This device supports the following chip types: 4D, 46, 48, T5, 7935, 8A, 4C, Chip conversion

Note: some chip data will be covered and locked.

Generate Remote

Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions.

Generate Smart key(card):

Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions.

Identify Coil

Search smart induction area Connect remote key with remote connector, Put KH100+'s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below).
Detect IMMO Connect remote key with remote connector, Put KH100+'s antenna close to key identification coil, and use key to turn ignition ON. When KH100+ buzzer beeps, it means signal is detected.

Remote Frequency

Enter this menu, put remote control at the device’s induction area to detect remote frequency.

Special functions:

Include: detect infrared signal, unlock Toyota smart key, FT Toyota smart key, Charge key, More functions, to be continued.

1. Put remote control at the infrared signal detection area, press the remote's button once. When the light on KH100+'s screen is on, it indicates there is infrared signal, otherwise there is no signal(see below pic).

2. FT smart key: For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Put in the smart key, click [select] to operate.

3. Unlock Toyota smart key/detect, Toyota key status, Put in the smart key, click OK to operate.

4. Charge key: For a chargeable key with battery, you can perform this function. Put in the key, click [OK] to operate.