×
2005 Saab 9-7x Keyless Entry Remote Fob Programming Instructions
DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.
Find A Locksmith
2005 Saab 9-7x Key Programming Instructions
- Insert the original, already programmed key in the ignition and start the engine.
- After the engine has started, turn the key to off and remove the key.
- Insert the key to be programmed and turn it to on within 10 seconds of removing the original key.
- The security light will turn off once the key has been programmed. It may not be apparent if the security lightwent on due to how quickly the key is programmed. If your vehicle does not have a security light (04-07 GrandPrix, Bonneville, Impala) wait 10 minutes and 45 seconds to make sure the key has been programmed.
- Repeat steps 1 through 5 if additional keys are to be programmed.