Altronix - T2KSK7F12 - Power Supply Charger - Backplane 24VDC 10Amp - Keri System Altronix - Trove2 Encloser Tks2

Altronix - T2KSK7F12 - Power Supply Charger - Backplane 24VDC 10Amp - Keri System Altronix - Trove2 Encloser Tks2

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP. A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.
Altronix Power Supplies are ideal for a multitude of purposes, including:

• General Use
• CCTV
• Fire Alarm
• POIP

eFlow104NB Power Supply/Charger:

Input:

• Voltage: 120VAC, 60Hz, 4.5A.
• Main Fusing: 6.3A / 250V.

Output:

• Voltage: 24VDC @ 10A.
• Auxiliary 1A (unswitched).
• Protection: Overvoltage protection. Filtered and regulated.

Battery Backup:

• Type: Sealed lead acid or gel type.
• Fuse Rating: 10A @ 32VDC.
• Failover: Upon AC loss, instantaneous.

Fire Alarm Disconnect:

• Supervised: Latching or non-latching.
• EOL: 10K Resistor.

Supervision:

• AC Failure: Form “C” contacts.
• Battery: Form “C” contacts.
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.

Indicators LED:

• AC Input: 120VAC is present.
• DC Output: Powered.
• Battery: Discharged or not connected.

PDS8 Dual Input Power Distribution Module:

Input:

• Voltage: 24VDC from eFlow104NB and 12VDC from VR6.
• Main Fuse: 10A / 32V.

Output:

• Voltage: 12 or 24VDC individually selectable.
• Output Fuses: 3A / 32V.

Indicators LED:

• DC Output: Eight (8) individual output LEDs.
• Green: 12VDC
• Red: 24VDC.

ACM4 Access Power Controller:

Input:

• Voltage: 24VDC from eFlow104NB.
• Main Fuse: 10A / 32V.

Output:

• Voltage: 24VDC.
• Four (4) independently controlled 2.5A outputs:
• a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
• b) Four (4) dry form “C” 5A rated relay outputs.
• c) Any combination of the above.
• Four (4) auxiliary power outputs (unswitched).
• Output Fuses: 3A / 32VDC.

Indicators LED:

• Red LEDs: Outputs are triggered (relays energized).
• Green LED: FACP disconnect is triggered.

ACMS8 Dual Input Access Power Controller:

Input:

• Voltage: 24VDC from eFlow104NB and 12VDC from VR6.
• Input Fuse: 15A / 32V.

Output:

• Voltage: 12 or 24VDC individually selectable.
• Eight (8) selectable 12VDC - 24VDC independently controlled outputs or eight (8) indepently controlled Form “C” relay outputs:
• a) Fail-Safe and/or Fail-Secure power outputs.
• b) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.
• c) Auxiliary power outputs (unswitched).
• d) Any combination of the above.
• Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.
• Individual outputs may be set to OFF position for servicing.
• Output Fuses: 3A / 32VDC.

Indicators LED:

• Red LEDs: Outputs are triggered (relays energized).
• Blue LED: FACP disconnect is triggered.

Individual voltage LEDs:

• Green: 12VDC
• Red: 24VDC

VR6 Voltage Regulator:

Input:

• Voltage: 24VDC from eFlow104NB.

Output:

• Voltage: 12VDC.
• Current: 6A continuous.
• Other: Surge suppression.

Indicators LED:

• Input: 24VDC is present.
• Output: Powered.

Environmental:

Temperature:

• Operating: 0° C to 50° C (32° F to 122° F).
• Storage: - 20° C to 70° C ( - 4° F to 158° F).
• Relative Humidity 85% +/- 5%.
• BTU/Hr (approx.): 131 BTU/Hr.

Download:

• Installation Instruction