Hudson Lock DG3-APS-10 1" (25.4mm) Standard Cylinder with Satin Stainless Finish

Hudson Lock DG3-APS-10 1" (25.4mm) Standard Cylinder with Satin Stainless Finish

Description:

A common problem with narrow stile aluminum doors is an attack at the door jamb. An unprotected door is subject to a pry bar spreading the door and the jamb, or even ripping out the jamb, allowing unauthorized entry. Sawing the bolt has also been a means to gain unlawful entry. DorGard III™ will thwart all of these attempts, as well as guard the lock cylinder.

The DorGard III™ provides the same cylinder protection as the DorGard II™, plus has the added benefit of a latch protection plate. This hardened steel plate becomes an integral part of the DorGard™ system. Cast in one piece, with ribs on the back for added strength, the latch plate has two pins that will rest in holes drilled into the door jamb. This innovative pin feature adds another level of security to the door by linking the door and the jamb together. The DorGard III™ is the perfect choice for electric strike applications; it adds security to the convenience of electric strikes. It completely conceals the area of the lock bolt and strike, and blocks all access to the lock and cylinder. The DG3 can be used with any cylinders from 15/16″ to 1-3/8″ (2.38 to 3.50cm) in length.

Product Details:

• DG3-APS-10 1" (25.4mm) Standard Cylinder with Satin Stainless Finish

The DorGard III™ is non-handed so it can be used on right or left-handed doors.

DG-series door guards are available in either a Satin Stainless or Matte Bronze finish, providing an extremely durable and attractive finish. Mounting hardware and illustrated installation instructions are included. We strongly suggest using our TK3 installation kit.

Special plug protectors are also available for Schlage, Miwa, Dom, and Abloy.

Optional Plug Protectors For different brands of cylinders

No. 33-11 for Schlage
No. 33-12 for Miwa
No. 33-13 for Dom
No. 33-14 for Abloy
No. 33-16 for Zeiss-Ikon

Optional Spacers For longer length cylinders may be used in multiples as needed
No. 33-72D 1/16-inch (1.6mm) Matte Bronze Finish
No. 33-72S 1/16-inch (1.6mm) Satin Stainless Finish
No. 33-73D 1/8-inch (3.2mm) Matte Bronze Finish
No. 33-73S 1/8-inch (3.2mm) Satin Stainless Finish

Optional Shims For use when there is a slight mismatch between the door and the jamb, use in conjunction with 1/16-inch spacers. May be used in multiples as needed.
No. 33-76D 1/16-inch (1.6mm) Matte Bronze Finish
No. 33-76S 1/16-inch (1.6mm) Satin Stainless Finish